-
- unifire
fire protection
- Foam Equipment
-
- Low expansion Medium expansion Low/Medium Expansion In-line Inductor Foam suction hose
- Low
Expansion Foam Branchpipe, pipe
in stainless steel, protection ring and
handle in rubber. With ball valve
in light alloy. Connection to BS 336 –
- Type
Capacity
Throw length
-
S 2
200 l/min
23 m
- S 4
400 l/min
26 m
-
-
- Medium Expansion Foam Branchpipe, pipe in stainless steel, protection ring and handle in rubber. With ball valve in light alloy and manometer. Connection to BS 336 – 2.1/2” male.
- Inlet
pressure 5 bar. Expansion ratio 21 to 200
-
- Type
Capacity
Throw length
-
M 2
200 l/min
8 m
- M 4
400 l/min
10 m
-
- Low/Medium
Expansion Foam Branchpipe,
pipe in stainless steel, protection ring and handle in rubber. With
ball valve in light alloy and manometer.
With change over handle for low/medium expansion foam. Connection to BS 336
– 2.1/2” male. Inlet pressure 5
bar. Expansion ratio 5 to 200
-
- Type
Capacity
Throw length
- S2/M
2 200 l/min
23 / 7 m
- S4/M
4 400 l/min
26 / 8 m
- In-Line Inductor, the in-line inductors are designed to supply foam concentrate at a given
- rate into the water supply line.
- The
inductors are placed in the supply line between the pump and foam branchpipe.
- Foam
admixing rate adjustable from 0 to 6 %
- Material
pipe polyoxymethylene.
- In-
and outlet in light alloy to BS 336 (male
- Inlet
pressure 8 bar.
- Type Z2, capacity 200 l/min at 8 bar inlet pressure
- Type
Z4, capacity 400 l/min at 8 bar inlet pressure
- Foam suction hose, 3/4"- 19 mm, clear, reinforced, complete with Storz coupling 1" - 31 mm for connection to the in-line inductor type Z
- A. with one Storz coupling, length 1500 mm
- B. with one Storz coupling and stainless steel suction pipe, total length 2500 mm
